To use the Surfshark VPN app,follow these organized steps:

1. Download and Install the App:

   • Download the Surfshark VPN app from the official website.
   • Load the app and install it on your computer.

2. Set Your Own Password:

   • Navigate to the settings menu.
   • Click on "Set your own password."
   • Check the box and enter your password.
   • Save the settings.

3. Configure DNS Servers:

   • Go to the settings menu and select "Add DNS server."
   • Choose an accessible IP address (e.g., 192.168.1.1).
   • Leave the default port at 88 and click save.
   • Access the proxy server, click "Add DNS server settings" and set the port to 443 (HTTPS).
   • If needed, use another DNS server by clicking "Add DNS server (again)" and select a different IP.
   • Repeat the DNS server configuration if required.

4. Set Your IP Address:

   • Click "Set your own IP address," enter your current IP (e.g., 192.168.1.1), and click save.
   • Click "Add a new DNS server," select your IP, and save.

5. Configure DNS Settings:

   • Click "Use this DNS server for all traffic" and select the same DNS server.
   • Save the settings.

6. Save and Save Changes:

   Click "Save changes" to ensure all settings are saved.

7. Test the VPN:

   • Log in using your username and password.
   • Connect to your internet and check the logo in the corner to confirm the VPN is up and running.

Important Notes:

• Ensure the DNS server and port settings are correct (e.g., 443 for HTTPS).
• Verify the app's settings before connecting to the internet.
• If you encounter issues, check the app's settings for any errors or warnings.